Tag: Stout

With the winter chill setting into the air, it was time to visit Mike up in Bow to brew another partigyle imperial stout. We were happy with both beers from the last time. Last year I might have over planned the brewing process. This year I took a bit of a less detailed approach in designing the parti-gyle, and I went crazy figuring out the base recipe. I did some analysis of the imperial stout recipes I could find. I started with the 13F (Imperial stout) category of the NHC recipe breakdown written up by GatorBeer, which he compiled from here. I then added all the recipes I could find, Katethe great, Jami’s recipe, BYO’s Stone RIS clone, and a few others. You can see the Imperial Stout Grain ratio spreadsheet here. We both liked the imperial stout from last time, but the reviews I got elsewhere indicated it wasn’t complex enough, and didn’t have enough stout character. With the spread sheet I could see the grain percentages to validate a recipe of our design. This past year a few ingredients have really stuck in my head. Chocolate wheat we used in the Janet’s Baby, golden naked oats I keep hearing about, and brown malt has been on my mind since reading Ron Pattinson’s Vintage Beers. The first two are somewhat new, and bring something unique to the recipe. The chocolate wheat brings a nice chocolaty note, while not being acrid or overly bitter like normal chocolate malt, and it adds some head retention from wheat. The Golden naked oats are a Crystal oat, bringing both the silky mouth feel of oats, but with crystal sweetness. Both of these are like two for one malts in my opinion. The brown malt seems like a throwback traditional malt to use, it’s what these beers used to be made mostly of. Inspire of these additions, we tried to simplify the grain bill from last years KTG kitchen sink recipe. This is a much more simplified recipe:

http://beersmithrecipes.com/viewrecipe/591843/we-are-stout-ltrepeatablegt

This is my second attempt at a sweet stout, the first was a partial mash oatmeal stout, this was a small biab all grain batch designed from a recipe found on beersmithrecipes.com. I made a few changes to my recipe for scaling, in an attempt to smooth it out.

I try to brew as often as reasonable, which is usually when I’ve got a keg free, when I’ve got a competition to enter, or it’s been way too long. In 2012 it was more like every 3 months, despite wanting to brew more often. That is what makes brewing 3 times in december quite an accomplishment. This last batch pushed the 2012 total to 6 batches, 5 beers, one cider, an extract only batch, extract and steeping grains, a partial mash, all grain, and brew in a bag all grain. To say I’m a dabbler might be an understatement. One thing that hasn’t changed a whole lot is what I brew.

This New Years eve brew session was pretty much on a lark. I had picked up a pair of 2.5 gallon kegs from adventures in homebrewing as a christmas gift to myself. From a trip to Valley Malt this fall, I have a stock pile of grain. From stocking up during the fall harvest I also have an abundance of hops. I’ve been thinking of how to fill one of the small kegs, while taking advantage of what I had on hand. 90% of the grain, 100% of the hops, came from what I had on hand. I did still have to make the trip to the home brew shop to pick up yeast, and a few misc things, but it was a little easier on the wallet. I only needed caraffa II, lactose powder, and yeast. Anyone guess what I brewed from the ingredients I picked up? Since kicking the Oatmeal stout, I’ve wanted to brew something dark to go beside the pales I usually brew, and have on tap. My wife likes stouts more than my typical beers. I

This is the first stout I’ve brewed, and I’m not really a big stout drinker, so I’m not sure this is a very qualified review this, but I’ll give it a go.
This is a very thick, rich stout. It has plenty of residual sugar, finishing at 1.018 will do that to you.

As you can see from the photo there isn’t much head.

In my prior project update I mentioned the all grain setup, but I had this Oatmeal stout extract kit I purchased from Austin Homebrew Supply that I need to brew. I have told T I would brew her a beer for quite some time, and she enjoys stouts. I also picked this specific kit because it was shelf stable. I wanted to make sure I had something I could be ready to brew anytime, that wouldn’t suffer from sitting around until I had time to brew. I was hoping to brew Saturday evening, but the weather conspired against me.